
FrSky S8R
S8R
New product
The S8R provides the user a choice between a normal 8-channel receiver or a stabilized receiver. There are two stabilization modes (SAS and autolevel) and two aerobatic elements (leg and candle) that can control channels in flight. Autolevel will be especially appreciated by beginners.
10+ Items
Contains LBT firmware. Learn more here . EU 2015 firmware for S8R does not exist.
English manual and the necessary configuration tools are available in the download tab. For PC configuration, you need this connecting cable .
Overview of FrSky receivers here .
Stabilization modes:
- SAS - this function compensates for external influences like gusts of wind and compensates for them thanks to the gyroscope
- Autolevel - Autolevel mode aligns the airplane horizontally
- Shear - Mode will bring the aircraft to the shear
- Candle - this mode will hang the airplane on the propeller
Features:
- 8-channel receiver
- built-in triaxial gyroscope and triaxial accelerometer
- RSSI PWM output (0-3.3V)
- built-in RxBat battery voltage sensor
- S.Port
- SBUS
Specifications:
- Model name: S8R (8-channel receiver with built-in 3-axis gyr and 3-axis accelerometer)
- Dimensions: 46.47 mm × 26.78 mm × 14.12 mm (L × W × D)
- Weight: 14g
- Antennas: rod, 150 mm
- antennas connected by connectors: yes, Ipex4
- 8 channels (1-8 channels from conventional channel outputs)
- RSSI output: PWM voltage output (0–3.3), 100 Hz, 1500 ± 500 μs
- operating voltage range: 4-10 V
- Operating current: 120 mA @ 5 V
- S.Port: yes
- SBUS: yes
- pin voltage measurement: yes, RxBat
- analog port: no
- reach: full range
- gyro measurement range: ± 2,000 dps
- Accelerometer measuring range: ± 4 g
- Firmware Upgrade Option
- compatibility: S8R-EU only works with FrSky Horus X12S and < / span> Taranis X9D Plus / Taranis-E / XJT in D16-LBT mode < / li>
Pairing
Put the transmitter in pairing mode. Press and hold the F / S button, bring in the power, wait 2-4 seconds. Successful pairing is accompanied by a green LED and red flashes. Disconnect the power supply and release the button. If this fails, try the process again, but increase the space between the transmitter and the receiver to 1-2 m.
LEDs
Green LED |
Red LED |
<iecStatus |
lights |
flashes |
pairing |
flashes |
off |
normal traffic |
off |
flashes |
lost signal |
Yellow LED |
<iecStatus |
lights |
accelerometer values outside limits - calibration required |
off |
Accelerometer values OK |
flashes |
Position calibration completed |
Blue LED |
<iecStatus |
lights |
running an internal test |
off |
internal test completed |
<
On all items we offer warranry 24 months.
Spare parts and battries capacity 6 months.
We provide warranty and post warranty services.