English
Čeština
FrSky R9 MX
R9MX
New product
Revised version of R9 Mini and R9 MM. Use Ipex1 connector for higher durability. Can make full use of the ACCESS protocol.
This product is no longer in stock
Contains LBT firmware. More here . And always update to the latest FW, even after purchase.
Clear table of FrSky receivers here .
Properties:
- ACCESS
- Telemetry
- Low latency
- S.Port / F.Port
- Miniature dimensions
- Redundant features
- Inverted S.Port
- Ipex1 connector
Receiver specification:
- Channels: 4 PWM / 16 SBUS with telemetry
- Dimensions: 18 mm × 12 mm × 3.2 mm
- Weight: 3.2 g
- antenna: T EU
- Antenna connected via connector: yes, IPEX1
- RSSI output: no
- S.Port: yes
- F.Port: yes
- SBUS: yes + invert
- analog port: no
- Pin voltage measurement: yes, RxBat
- Voltage: 3.5 to 0 V
- consumption: 100 mA @ 5 V
- updatable firmware
- Compatibility: R9 ACCESS
Involvement
Depending on the firmware type, the receiver works with S.Port or F.Port.
Receiver LED
| LED | Meaning |
| red flashes slowly | is not a signal |
| green on | connected, paired, data transfer in progress |
| green on, red flashing fast | pairing |
| green on, red on | waiting for pairing |
Sign up and Pair We will bring the transmitter into the registration mode. Press and hold the button on the receiver, bring power, the red and green LEDs are lit. If the radio finds the receiver writes its type. We confirm this on the radio and the receiver starts flashing green and red LEDs alternately. Select the position of the receiver as needed and put Bind, disconnect the receiver from the power supply and reconnect it to the power supply (without a button), the radio will write the type of receiver again and we will approve it. The receiver remains registered in the given position.
Failsafe
Pair the receiver. Set the radio to failsafe according to your requirements
On all items we offer warranry 24 months.
Spare parts and battries capacity 6 months.
We provide warranty and post warranty services.
