English
Čeština
FrSky Archer Plus SR10+
A-SR10+
New product
The SR10+ stabilization receiver is the successor to the successful SR10 Pro receiver for the ACCESS and ACCST D16 protocol. It provides the user with a choice between a normal 10-channel receiver or a receiver with stabilization. There are two stabilization modes (SAS and autolevel) and two acrobatic elements (foot and candle), which can control the channels in flight.
5+ Items
Contains ACCESS firmware
The Czech manual and the necessary configuration tools are available in the download tab.
Overview table of FrSky receivers here .
Stabilization modes:
- SAS - This feature compensates for external influences such as gusts of wind and compensates for them thanks to the gyroscope.
- Autolevel - Auto level mode aligns the aircraft to a horizontal position
- Foot - mode brings the plane to the foot
- Candle - This mode hangs the plane on the propeller
Properties:
- Ten-channel stabilized receiver
- Built-in triaxial gyroscope and triaxial accelerometer
- Redundancy support
- Built-in RxBat battery voltage sensor
- S.Port / F.Port / F.Port 2
- updatable FW OTA
- Increased immunity to internal combustion engine interference
Specifications:
- Model name: SR10+ (ten-channel receiver with built-in triaxial gyr and triaxial accelerometer)
- dimensions: 46.5 mm × 26.3 mm × 14.7 mm (l × w × d)
- weight: 13 g
- antennas: rod - dipole, 150 mm
- Antenna Connected Connectors: Yes Ipex4
- Number of channels:
-
- ACCESS - Port 1: PWM / SBUS Out / FBUS / S.Port / SBUS In
Port 2-10: PWM / SBUS Out / FBUS / S.Port - ACCST - Port 1 - 8 PWM, Port 9 - SBUS, Port 10 - S.port
- ACCESS - Port 1: PWM / SBUS Out / FBUS / S.Port / SBUS In
- RSSI output on board: no
- operating voltage range: 3.5-10 V
- operating current: <100 mA @ 5 V
- S.Port: yes
- SBUS: OUT and IN
- Pin voltage measurement: yes, RxBat
- analog port: yes 0-36V (integrated splitter)
- reach: full reach
- firmware update option
- compatibility: ACCESS and ACCST D16
Sign up and Pair
We will bring the transmitter into the registration mode. Press and hold the button on the receiver, bring power, the red and green LEDs are lit. If the radio finds a receiver, it writes its type. We confirm this on the radio and the receiver starts flashing green and red LEDs alternately. Select the position of the receiver as needed and put Bind, disconnect the receiver from the power supply and reconnect it to the power supply (without a button), the radio will write the type of receiver again and we will approve it. The receiver remains registered in the given position.
LED indication
|
Green LED |
Red LED |
Status |
|
lit |
lit |
awaiting registration |
|
flashing |
flashing |
registration done |
|
lit |
off |
binding |
|
blinks |
off |
traffic |
|
off |
lit |
failsafe |
|
off |
flashing |
no signal |
|
Yellow LED |
Status |
|
lit |
Accelerometer values out of limits - calibration required |
|
off |
Accelerometer values OK |
|
flashing |
Position calibration complete |
|
Blue LED |
Status |
|
lit |
An internal test is in progress |
|
off |
Internal test completed |
Eight-Channel Receiver
When the stabilization function is turned off, the GR8 behaves like a transparent eight-channel receiver.
Physical channel order:
|
GR8 tag |
Channel without stabilization |
Stabilization Channel |
|
Ail / 1 |
1 |
Wings |
|
Ele/2 |
2 |
Výškovka |
|
THR/3 |
3 |
Gas |
|
RUD / 4 |
4 |
Direction indicator |
|
Ail2 / 5 |
5 |
Wings 2 |
|
Ele2/6 |
6 |
Elevation 2 |
|
7 to 10 |
7 to 10 |
Stabilization does not interfere |
Control Channel Order:
|
Function |
Channel |
|
Profit gyra |
9 |
|
Flight modes |
10 and 11 |
|
Self-check |
12 |
| Channels | 10 |
On all items we offer warranry 24 months.
Spare parts and battries capacity 6 months.
We provide warranty and post warranty services.
