FrSky Archer Plus GR8
FrSky Arche Plus GR8 is next successor of G-RX8 and Archer GR8 with ACCESS and ACCST D16 protocol. Have integraded high precision vario so is suitable for gliders.
10+ Item Items
Warning: Last items in stock!
Clear table of FrSky receivers here .
- updatable OTA firmware
- Improved vario
- basic black box
- S.Port / FBUS
- Number of channels: 8PWM 16/24SBUS
- Dimensions: 54 mm x 20 mm x 10 mm
- Weight: 9.8 g
- voltage: 3.5-10 V
- consumption: 65 mA @ 5V
- antennas: rods, 150 mm
- Antenna Connected Connectors: Yes Ipex4
- Range: full (<2 km)
- Vario: -700 to 10000m, 0.1m, + -10m / s
- Servo modes: 20 ms (FS - Normal) 7 ms (HS - High)
- compatibility: ACCESS and ACCST D16 v2,1
Sign up and Pair We will bring the transmitter into the registration mode. Press and hold the button on the receiver, bring power, the red and green LEDs are lit. If the radio finds the receiver writes its type. Confirm it on the radio and the receiver will start flashing green and red LEDs alternately. Select the position of the receiver as needed and put Bind, disconnect the receiver from the power supply and reconnect it to the power supply (without a button), the radio will write the type of receiver again and we will approve it. The receiver remains registered in the given position.
|red flashes slowly||is not a signal|
|red on, green on||registration|
|flashes red and green flashes alternately||Registration successful|
|green on||successful bind and normal operation|
Pair the receiver. Settings are made via the radio menu.
On all items we offer warranry 24 months.
Spare parts and battries capacity 6 months.
We provide warranty and post warranty services.