FrSky Archer R10 Pro
With the new R10 Pro FrSky receiver, calls for a 10-channel receiver have been intercepted. The connection of batteries via XT30 is also interesting
10+ Item Items
Warning: Last items in stock!
Availability date: 2014-11-12
Clear table of FrSky receivers here .
- updatable OTA firmware
- Power redundancy
- Higher durability for internal combustion engines
- S.Port / F.Port
- Number of channels: 10PWM 16/24 SBUS
- Dimensions: 48.5 mm x 33 mm x 17 mm
- Weight: 21 g
- voltage: 3.5-10 V
- consumption: 80 mA @ 5V
- antennas: rods, 150 mm
- Antenna connectors connected: yes, Ipex4
- Range: full (>2 km)
- Servo modes: 20 ms (FS - Normal) 7 ms (HS - High)
- Ain2: yes 0-36V (divider 1:10)
- Compatibility: ACCESS
Caution: if you are connecting power via the XT30, don't connect power to another channel anymore!
Sign up and Pair We will bring the transmitter into the registration mode. Press and hold the button on the receiver, bring power, the red and green LEDs are lit. If the radio finds the receiver writes its type. We confirm this on the radio and the receiver starts flashing green and red LEDs alternately. Select the position of the receiver as needed and put Bind, disconnect the receiver from the power supply and reconnect it to the power supply (without a button), the radio will write the type of receiver again and we will approve it. The receiver remains registered in the given position.
|red flashes slowly||is not a signal|
|red on, green on||registration|
|flashes red and green flashes alternately||Registration successful|
|green on||successful bind and normal operation|
Pair the receiver. Settings are made via the radio menu.
On all items we offer warranry 24 months.
Spare parts and battries capacity 6 months.
We provide warranty and post warranty services.