English
Čeština
FrSky Archer Plus R10+
A-R10+
New product
With the new R10+ FrSky receiver, calls for a 10-channel receiver have been intercepted. Can be used with older radios with ACCST D16
5+ Items
Clear table of FrSky receivers here .
Properties:
- updatable OTA firmware
- Redundancy
- Higher durability for internal combustion engines
- S.Port / F.Port
- Ain2
- VFR
Specifications:
- Number of channels:
- ACCESS - Port 1: PWM / SBUS Out / FBUS / S.Port / SBUS In
Port 2-10: PWM / SBUS Out / FBUS / S.Port - ACCST - Port 1 - 8 PWM, Port 9 - SBUS, Port 10 - S.port
- Dimensions: 46.5 mm x 26.3 mm x 14.7 mm
- Weight: 13 g
- voltage: 3.5-10 V
- consumption: <100 mA @ 5V
- antennas: rods, 150 mm
- Antenna connectors connected: yes, Ipex4
- Range: full (>2 km)
- Servo modes: 20 ms (FS - Normal) 7 ms (HS - High)
- Ain2: yes 0-35V (divider 1:10)
- Compatibility: ACCESS and ACCST D16
Sign up and Pair
We will bring the transmitter into the registration mode. Press and hold the button on the receiver, bring power, the red and green LEDs are lit. If the radio finds the receiver writes its type. We confirm this on the radio and the receiver starts flashing green and red LEDs alternately. Select the position of the receiver as needed and put Bind, disconnect the receiver from the power supply and reconnect it to the power supply (without a button), the radio will write the type of receiver again and we will approve it. The receiver remains registered in the given position.
LED indication
| LED | Meaning |
| red flashes slowly | is not a signal |
| red on, green on | registration |
| flashes red and green flashes alternately | Registration successful |
| green on | successful bind and normal operation |
Failsafe
Pair the receiver. Settings are made via the radio menu.
| Channels | 10 |
On all items we offer warranry 24 months.
Spare parts and battries capacity 6 months.
We provide warranty and post warranty services.
