English
Čeština
FrSky Archer Plus R6
A-R6+
New product
FrSky's Archer Plus R6 is the successor of the RX6R reciever with ACCESS and ACCST D16 protocol.
This product is no longer in stock
Clear table of FrSky receivers here .
Properties:
- updatable OTA firmware
- Redundancy
- basic Black Box
- S.Port / FBUS
- Ain2
- VFR
Specifications:
- Number of channels: 6PWM 16 / 24SBUS
- Dimensions: 33 mm x 15 mm x 9.7 mm
- Weight: 4.2 g
- voltage: 3.5-10 V
- consumption: 65 mA @ 5V
- antennas: rods, 150 mm
- Antenna connectors connected: yes, Ipex4
- Range: full (>2 km)
- Servo modes: 20 ms (FS - Normal) 7 ms (HS - High)
- Compatibility: ACCESS and ACCST D16
Sign up and Pair We will bring the transmitter into the registration mode. Press and hold the button on the receiver, bring power, the red and green LEDs are lit. If the radio finds the receiver writes its type. We confirm this on the radio and the receiver starts flashing green and red LEDs alternately. Select the position of the receiver as needed and put Bind, disconnect the receiver from the power supply and reconnect it to the power supply (without a button), the radio will write the type of receiver again and we will approve it. The receiver remains registered in the given position.
LED indication
| LED | Meaning |
| red flashes slowly | is not a signal |
| red on, green on | registration |
| flashes red and green flashes alternately | Registration successful |
| green on | successful bind and normal operation |
Failsafe
Pair the receiver. Settings are made via the radio menu.
| Channels | 6 |
On all items we offer warranry 24 months.
Spare parts and battries capacity 6 months.
We provide warranty and post warranty services.
