English
Čeština
FrSky X8R
X8R
New product
Receiver features 16 channels (8 PWM outputs and 16 on Sbus) plus the exciting new Smart Port.
1 Item
Contains LBT firmware. Learn more here . If you require a different version, please include it in the order note.
FrSky receiver overview table here .
Features:
- 8 PWM channels, 16 SBUS channels
- antennas connected with connectors, making it easy to replace them.
- RSSI output
- telemetry port
- sends telemetry data to RSSI, RxBat
- multiple receiver operating modes
Specifications:
- Channels: 16 (1-8 to regular, 1-16 to from SBUS port)
- Dimensions: 46.4mm x 26.7mm x 14.1mm
- Weight: 16.6g
- Antennas: PCB 150mm
- antennas connected by connectors: yes, Ipex1
- RSSI output: PWM (0-3.3V)
- S.Port: yes
- SBUS: yes
- Analog port: no
- Pin voltage measurement: yes, RxBat
- Voltage: 4-10V
- Power consumption: 100 mA @ 5 V
- Range: 1.5 km
- Updatable firmware
- Compatibility: FrSky DFT / DJT / DHT / DHT-D in D mode, FrSky Taranis X9D / XJT in D8 mode, FrSky Taranis X9D / XJT in D16 mode
Pairing
Put the transmitter in pairing mode. According to the table set the desired mode, the most common is Mode 5. Then according to the table select the button during pairing, wait 2-4 seconds. Successful pairing is accompanied by green LED and red flashes. Disconnect the power supply and remove any jumpers. If this fails, try the process again, but increase the space between the transmitter and the receiver to 1-2 m. |
Telemetry |
Channels |
Pairing | ||
|
Pre-pairing connector on channel signal pins |
F / S pairing button |
|||
|
Mode 1 (D8) |
CH1~CH8 |
CH7&CH8 |
just plug in the receiver, no need to press the button |
|
|
Mode 2 (D16) |
show |
CH1~CH8 |
CH3&CH4 |
to turn on the receiver's power when the pairing button is pressed |
|
Mode 3 (D16) |
show |
CH9~CH16 |
CH1&CH2 |
|
|
Mode 4 (D16) |
√ |
CH9~CH16 |
CH1 & CH2 and CH3 & CH4 |
|
|
Mode 5 (D16) |
√ |
CH1~CH8 |
without a jumper |
|
Transmitter and receiver combility
| Transmitter Mode | Receiver Series |
| D16 | X series - X8R, X6R, X4R, XSR etc. |
| D8 | D series - D8R4-II, D4R-II, etc. |
| LR12 | L-L9R series |
| V8 | series V - V8R4-II etc. |
Some receivers are multi-mode, so they can be paired in multiple modes. For details, refer to the specific receivers.
Channel Extensions
This receiver is a 16-channel. However, only a few channels are brought out to save space. All 16 channels are in a SBUS data bus.
To get more channels, the following options are available:
- Pair two receivers to one transmitter module. This is only possible with two types of receivers, the X8R and X6R. One of the receivers must be paired with telemetry and the other not!
- Use SBUS servos or connect the control unit via SBUS. Then you can remap the output channels to 9-16 using Mode 4.
- Use SBUS converters to CPPM or PWM .
| LED | Meaning |
| red flashes slowly | is not a signal |
| green | connected, paired, data transfer |
| green on, red fast flashing | pairing |
| green flashes twice | failsafe save confirmation |
Failsafe
A very important feature of the X-Series receivers is the failsafe mode, which allows the model to be set to the desired mode in the event of a power failure. Receiver Settings Pair the receiver. Set the channels to the desired position, briefly press the F / S button (for less than 1 second). The green LED flashes twice to confirm. To deactivate the filesafe function, pair the receiver again. To set the pulses to be lost when signal is lost - turn off the transmitter and start the receiver, briefly press the F / S button (for less than 1 second). Transmitter settings In addition to several failsafe modes, the Taranis can also be set up individually filesafe via transmitter - item custom . This is then automatically sent to the receiver in 9 second cycles. If failsafe is not set, the receiver holds the last channel position before signal loss. You can reset the failsafe factory settings by pairing the receiver.
| Channels | 8 |
On all items we offer warranry 24 months.
Spare parts and battries capacity 6 months.
We provide warranty and post warranty services.
